To keep your space heater from tripping the breaker, make sure you’re using the correct wattage for your particular heater. If your space heater has a dial or settings, start at the lowest setting and gradually increase it until you reach the desired temperature. Also, be sure to keep any flammable materials away from the space heater, as this can cause a fire.
- Check the wattage of your space heater
- Most space heaters are between 750 and 1500 watts
- Add up the wattage of all the other devices you have plugged into the same circuit
- If the total wattage is close to or exceeds the capacity of the circuit, then you may need to plug your space heater into a different circuit
- If you have multiple space heaters, spread them out among different circuits if possible
- Make sure that your space heater is not obstructed by furniture or anything else that could block airflow and cause it to overheat
How To Stop My Heater From Overloading My Power Circuit
Space Heaters That Won’T Trip Breaker
If you have ever had an electric space heater that trips your breaker, you know how frustrating it can be. You may be wondering if there is a space heater out there that won’t trip your breaker. The good news is, there are!
Here are a few space heaters that won’t trip breaker: 1. Vornado AVH10 Vortex Heater – This space heater has a special design that allows it to circulate heat more effectively, and it also has a tip-over protection feature. 2. Honeywell HCE200W UberHeat Ceramic Heater – This space heater has ceramic heating elements that provide quick and even heating.
It also includes an automatic shut-off feature for added safety. 3. Lasko 754200 Ceramic Space Heater – This space heater features an adjustable thermostat and two heat settings (high and low). It also has overheating protection for added safety.
Space Heater Trips Power Strip
If your space heater trips your power strip, there are a few things you can check. First, make sure that the power strip is rated for the wattage of your space heater. If it’s not, then that’s probably why it’s tripping.
You can also try plugging the space heater into a different outlet to see if that makes a difference. Sometimes power strips can get overloaded and trip, so if you have another one handy, give that a try. Finally, make sure that nothing else is plugged into the power strip beside the space heater.
If there are other devices plugged in, they could be drawing too much power and causing the strip to trip.
Why Does My Electric Heater Keep Tripping the Breaker?
If your electric heater is tripping the breaker, there are a few possible explanations. The most likely cause is that your heater is drawing more power than the breaker can handle. This could be because the heater is too big for the space you’re trying to heat, or because it’s old and inefficient.
Another possibility is that there’s something wrong with the wiring in your home, which is causing a surge of electricity when you turn on the heater. If you’re not sure what’s causing the problem, it’s best to call an electrician to take a look.
Heater Trips Breaker After a Few Minutes
If your heater trips the breaker after only a few minutes, there are several possible causes. First, check to see if the breaker itself is faulty. If it is, you’ll need to replace it.
If the breaker is not at fault, then the problem is likely with either the heating element or thermostat.
The first thing to check is the heating element. If it’s burned out, then that’s probably why your heater trips the breaker.
You’ll need to replace the element in order to fix the problem.
If the heating element looks fine, then the next thing to check is the thermostat. It’s possible that it’s not functioning properly and needs to be replaced.
Alternatively, if it’s turned down too low, that could also cause your heater to trip the breaker. Simply turn up the thermostat and see if that solves the problem.
If you’ve checked both the heating element and thermostat and still can’t figure out why your heater keeps tripping the breaker, then you may need to call a professional for help.
Credit: hvacguides101.com
Can I Use a Surge Protector With a Space Heater?
Yes, you can use a surge protector with a space heater. However, there are a few things to keep in mind. First, make sure that the space heater is rated for the same voltage as the surge protector.
Second, make sure that the surge protector is rated for the amperage of the space heater. Finally, make sure that the surge protector is properly grounded.
How Do You Use a Space Heater Without Blowing a Fuse?
If you want to use a space heater without blowing a fuse, there are a few things you can do. First, make sure that the space heater is the only thing plugged into the outlet. If there are other devices plugged in, they could be drawing too much power and causing the fuse to blow.
Second, try using a lower-wattage space heater. A lower wattage means that the space heater will draw less power and is less likely to cause the fuse to blow. Finally, if you have an older home with outdated wiring, you may want to have an electrician check your outlets and wiring to make sure they can handle the power draw of a space heater.
Will a 1500 Watt Heater Trip a Breaker?
If your home has a typical circuit breaker panel with 15-amp breakers, then you can have up to 10 heaters on a single circuit. That said, it’s never recommended to max out the number of appliances on a circuit. If you’re running multiple heaters, it’s best to distribute them evenly across different circuits to avoid overloading any one breaker.
Now, let’s say you have a 1500-watt heater. If that’s the only thing plugged into the circuit, then it will definitely trip the breaker if it’s drawing more than 10 amps of power. In most cases, a 1500-watt heater will actually draw closer to 12 or 13 amps when it first turns on as it’s working to reach its set temperature.
So unless you have other appliances on that circuit that are sharing the load, the heater will probably trip the breaker. Of course, there are always exceptions and variables to consider. The age and condition of your wiring play a role in how much current it can handle before tripping.
If your wiring is old or damaged, it may not be able to handle as much current as newer wiring. Additionally, if your heating element is partially obstructed (maybe by dust or pet hair), that could also cause it to draw more power and trip the breaker more easily.
Why Should Space Heaters Not Be Plugged into Power Strips?
Space heaters should not be plugged into power strips because they can overload the circuit and cause a fire. Space heaters use a lot of electricity and can easily trip a circuit breaker. If you must use a space heater, plug it directly into a wall outlet.
Conclusion
If your space heater is tripping your breaker, there are a few things you can do to fix the problem. First, make sure that your space heater is the only thing plugged into the outlet. If there are other devices plugged in, they could be drawing too much power and causing the breaker to trip.
Second, check the circuit breaker itself to see if it needs to be reset. Finally, if the problem persists, you may need to upgrade your electrical panel to one that can handle more power.